ap-30711/12 description the ap-30711 and the ap-30712 are both high resolution, dual input, syn- chro/resolver angle position indica- tors. these units convert analog syn- chro or resolver position information into a digital word. the digital word is used to display angular information on the front panel of the unit. each units standard display angular range is decimal degrees from 0.000 to 359.999. bipolar 179.995 is avail- able as a low-cost option. both units are available in two frequency ranges of 360 to 1200 hz or 47 to 440 hz. the digital word is also available for use from the rear panel of both units through a parallel bcd interface. the ap-30711s small size and remote programming feature makes it ideal for automatic test, panel mount applications. the bench top ap- 30712 has input terminals and con- trols on the front panel, and is avail- able with an optional ieee-488 or mate/ciil interface in the rear. applications the ap-30711 and the ap-30712 can be used wherever high accuracy syn- chro or resolver angle information is required for display, control, testing pur- poses or computation. applications include development or production testing of synchro/resolver based sys- tems, information translators in quali- ty control systems, machine tool con- trols, motion feedback, and automatic test equipment. synchro/resolver angle position indicator features ? transformer-isolated synchro and resolver inputs ? auto-leveling of any input between 10 and 100 v l-l ? resolution: 0.001 ? auto phase shift compensation ? ieee-488 or mate/ciil interface option ? 1999 data device corporation
2 ap-30711 and ap-30712 specifications (cont) unit value v v v v (pin 42) (pin 27) (pin 43) v rms v rms hz va 115 10%, or 230 10% 47 - 440 25 maximum temperature range operating inches (cm) inches (cm) lbs (kg) lbs (kg) c 0 - 70 parameter 179.995 180 1000 1.5 0.4 0-359.999 75 200 3.0 1.5 deg/sec deg/sec sec max sec max v l-l hz hz degrees ohms 3 to 115 47 to 400, or 360 to 1200 100k minimum 179 option 5? decimal 0.55 standard 6 decimal 0.55 digits inches display number of digits size of digits 0 - 359.999 179.995 angular ranges standard 179.995 option 0.004 0.010 degrees degrees accuracy standard 179.995 option value unit parameter ap-30711 and ap-30712 specifications degrees degrees synchro or resolver channel 1: synchro channel 2: resolver 10 to 100 (agc) 47 to 440, or 360 to 1200 30 maximum 1 meg minimum 0.001 0.005 resolution standard 179.995 option degrees degrees signal input input type ap-30711 ap-30712 voltage levels frequency allowable phase shift impedance dynamic characteristics tracking rate 47-440 hz unit 360-1200 hz unit settling time (for 180 step) 47-440 hz unit 360-1200 hz unit digital outputs digital output data drive capability logic 1 logic 0 converter busy digital inputs (ttl compatible) level logic 1 logic 0 loading data freeze df df channel select power input voltage frequency power physical characteristics size ap-30711 ap-30712 weight ap-30711 ap-30712 reference input voltage frequency impedance v rms hz ohms 6 decade bcd (1; 2; 4; 8 code) 10 ttl loads ieee-488 gpib (optional) +2.5 minimum +0.6 maximum ttl compatible pulses, 1 s wide; transfer data 2 s after trailing edge of pulse 2.4 minimum 0.8 maximum 1 standard ttl 1 freeze, 0 or open-track 0 freeze, 1 or open - track 0 chan 1 1 or open - chan 2 1.75 x 9.50 x 12.50 (4.45 x 24.13 x 31.75) 3.50 x 9.50 x 12.50 (8.89 x 24.13 x 31.75) 6 (2.72) 8 (3.63)
3 ordering information ap-30711px-301 x operating voltage: v = factory set for 230vac line cord operation blank = factory set for 115vac line cord operation frequency and display ranges: 1 = 360-1200 hz, 0.000 deg. -359.999 deg. 2 = 47-440 hz, 0.000 deg. -359.999 deg. 3 = 360-1200 hz, 179.995 deg. 4 = 47-440 hz, 179.995 deg. ap-30712bx-30x x operating voltage: v = factory set for 230vac line cord operation blank = factory set for 115vac line cord operation interface: 1 = parallel bcd 2 = ieee 488 with parallel bcd 3 = mate/ciil with parallel bcd frequency and display range: 1 = 360-1200 hz, 0.000 deg. -359.999 deg. 2 = 47-440hz, 0.000 deg. -359.999 deg. 3 = 360-1200 hz, 179.995 deg. 4 = 47-440hz, 179.995 deg. ap-30711/12 mechanical outline rear view 8.81 9.50 7.94 front view .25 wide x .44 long oval 4 thru holes 1.72 1.25 .125 12.00 .50 side view rear view 8.875 9.50 7.94 front view .25 wide x .44 long oval 4 thru holes 3.50 2.98 1.156 12.00 .50 side view address
4 printed in the u.s.a. b-09/99-500 the information provided in this data sheet is believed to be accurate; however, no responsibility is assumed by data device corporation for its use, and no license or rights are granted by implication or otherwise in connection therewith. specifications are subject to change without notice. 105 wilbur place, bohemia, new york 11716-2482 for technical support - 1-800-ddc-5757 ext. 7389 or 7413 headquarters - tel: (631) 567-5600 ext. 7389 or 7413, fax: (631) 567-7358 southeast - tel: (703) 450-7900, fax: (703) 450-6610 west coast - tel: (714) 895-9777, fax: (714) 895-4988 europe - tel: +44-(0)1635-811140, fax: +44-(0)1635-32264 asia/pacific - tel: +81-(0)3-3814-7688, fax: +81-(0)3-3814-7689 world wide web - http://www.ddc-web.com
|
